3KVA/3KW/120V BATTERY BACKUP FOR DISTRIBUTED IT, TELECOM OR ENTERPRISE DEPLOYMENTS: This rack-mount line-interactive UPS system provides reliable battery backup and AC power protection against blackouts, brownouts, surges and line noise that can damage your IT equipment or destroy data. The SMART3000RM2U is ideal power management for high-end in-rack networking equipment, including servers, VoIP phones, data storage and PoE switches. Unity power factor ensures the most watts possible at each power rating, so you can connect more equipment. RELIABLE BATTERY BACKUP KEEPS YOU OPERATIONAL THROUGH POWER OUTAGES: The field-replaceable, hot-swappable VRLA battery modules allow you to work through short power failures and give you enough time to safely save files and shut down your system in case of a prolonged blackout. Switchover from line to battery power happens within milliseconds to maintain continuous operation of connected equipment without interruption or rebooting. OPTIONAL LX PLATFORM NETWORK MANAGEMENT CARD ALLOWS REMOTE ACCESS 24/7: The WEBCARDLXE network interface (sold separately) enables full remote configuration and management, including load shedding, reboots of connected equipment and safe shutdowns. The IP-based Auto Probe feature ensures continuous network uptime by communicating with other network devices, detecting lost connectivity and automatically rebooting IT equipment. Optional EnviroSense2 modules (E2MT, E2MTDO and E2MTHDI, all sold separately) provide a variety of environmental monitoring and control options. NEMA OUTLETS PROTECT YOUR CONNECTED COMPONENTS: One L5-30R and six 5-20R managed outlets provide connected equipment with pure sine wave AC output and allow you to monitor power consumption down to the outlet group level. Power provided by these outlets is filtered to protect connected equipment against damaging surges and line noise. Four 5-20R outlets are split into two independently switchable load banks that let you shed non-critical loads to extend runtime for critical loads. Front and rear cooling fans help protect equipment from overheating. AUTOMATIC VOLTAGE REGULATION (AVR) CORRECTS LOW- AND HIGH-VOLTAGE CONDITIONS: AVR protects your equipment from incremental hardware damage, data loss and performance problems caused by brownouts. The SMART3000RM2U maintains regulated 120V nominal output during brownouts and overvoltages from 80V to 151V while keeping the battery fully charged and ready to take over in case of power failure. PREMIUM PROTECTION FROM EMI/RFI LINE NOISE HELPS YOUR EQUIPMENT PERFORM BETTER: This UPS system filters out disruptive electromagnetic and radio frequency interference that can inflict hardware damage or data loss. This EMI/RFI filtering also helps your connected components perform better and last longer. INTUITIVE FRONT-PANEL INTERFACE FOR CONVENIENT UPS OPERATION AND MONITORING: The two-line front-panel LCD monitoring screen features 10 selectable screens that allow quick access to a wide range of detailed UPS and site power information. LEDs show UPS status: a green light means utility power is on, an orange light means the UPS is in battery mode and a red light indicates an active alarm or fault. The interface rotates to accommodate both rack-mount and tower configurations. ADVANCED COMMUNICATIONS PORTS ALLOW FOR AUTOMATIC SAVES AND SHUTDOWNS: RS-232 and USB ports connect to a device for a variety of communication options (cables are included). A dry-contact relay port can be programmed through the LCD to provide reliable communications to automation and industrial components. The RPO/ROO port permits emergency shutdown or remote restart of all connected equipment. VERSATILE INSTALLATION OPTIONS: You can mount the SMART3000RM2U in just 2U of space in an EIA-standard 19-inch rack using the included hardware. You can also adapt it for tower installation using the included support stands. The 10-foot power cord with NEMA L5-30P plug connects to a compatible AC outlet.
3000VA HIGH END BATTERY BACKUP: Ideal 3000W 7-outlet power management for high-end in-rack networking equipment. One L5-30R and six 5-20R managed outlets provide connected equipment with pure sine wave AC output and allow you to monitor power consumption down to the outlet group level. Power provided by these outlets is filtered to protect connected equipment against damaging surges and line noise. Four 5-20R outlets are split into two independently switchable load banks that let you shed non-critical loads to extend runtime for critical loads. Front and rear cooling fans help protect equipment from overheating.
ADVANCED POWER FEATURES: Automatic Voltage Regulation (AVR) maintains regulated 120V nominal output during brownouts and overvoltages from 80V to 151V while keeping the battery fully charged. EMI/RFI filters out disruptive electromagnetic and radio frequency interference that can inflict damage. ENERGY STAR 2.0 Certified UPS provides high efficiency to signal a reduction in BTU emissions, save on utility and cooling costs and help protect the environment. Unity power factor ensures the most watts possible at each power rating, so you can connect more equipment.
USER REPLACEABLE BATTERIES & NETWORK WEB CARD OPTION: User replaceable and hot-swappable internal batteries can be replaced easily in the field (744-A3122, sold separately). The WEBCARDLXE network interface (sold separately) enables full remote configuration and management, including load shedding, reboots of connected equipment and safe shutdowns. The IP-based Auto Probe feature ensures continuous network uptime by communicating with other network devices, detecting lost connectivity and automatically rebooting IT equipment. Optional EnviroSense2 modules (E2MT, E2MTDO and E2MTHDI, all sold separately) provide a variety of environmental monitoring and control options.
SMART FRONT-PANEL LCD INTERFACE: Features 10 selectable screens that allow quick access to a wide range of detailed UPS and site power information. LEDs show UPS status: a green light means utility power is on, an orange light means the UPS is in battery mode and a red light indicates an active alarm or fault. The control panel rotates to accommodate both rack-mount and tower configurations.
RELIABLE PRODUCT FULLY BACKED AND SUPPORTED: This product is covered by a 2-Year Manufacturer’s Warranty that can be upgraded to a 3-Year Warranty with Registration. This device is protected by a $250,000 Connected Equipment Insurance and is covered by Tripp Lite’s Chicago-based expert technical support team over phone, web and email. $250,000 Ultimate Lifetime Insurance; 2-year warranty
3000VA, 2250-Watt output power capacity compatible with North American 120V, 60Hz power
2U rack/tower form factor installs in standard 19-inch rack enclosures with an installed depth of only 18 inches
Protects sensitive networking equipment from blackouts, voltage fluctuations and transient surges
Line interactive Automatic Voltage Regulation (AVR) corrects inputs from 79 to 147VAC back to usable 120V levels without consuming battery power
11 minutes of battery backup at half load, and 4 minutes at full load
Reviews
There are no reviews yet.